PRODUCTS & SOLUTIONS

    LITHOS 5

    Pre-insulated metal panels with mineral fiber insulation for roofs (also available in the version with perforated internal support).

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Standard insulating thickness

    mm 50 - 60 - 80 - 100 - 120 - 150 - 200 panels of non standard thicknesses can be supplied upon request previous agreement on minimum quantities.

    Supports

    galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium; copper (CORAM).

    Isulation

    made by a special configuration insulating layer, in high-density mineral fibers (λ = 0,040 W/mK), arranged perpendicular to the plate plane.

    Protective treatments for external support available

    On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films

    Mod. EVO joint

    Last generation joint in the ECOLINE family, by its very rigid nature and with a high thermal break, does not require special plastic joints to hold the sheets, since the monolithicity is guaranteed by the perfect adhesion obtained with exclusive patented technologies. In particularly critical situations, a simple expanded gasket is used.

    Reaction to fire

    A2,s1-d0 - on normal unperforated panel, drilling does not allow this classification.

     

    Available on request
    high density mineral fibers
    Class Panel Thickness Certification Institute
    R.E.I. 30 Lithos 5 EVO (certified) 50 mm Tecnalia
    R.E.I. 60 Lithos 5 EVO (certified) 80 mm Tecnalia
    R.E.I. 120 Lithos 5 EVO (certified) 100 mm Tecnalia
    A2-s1,d0 Lithos 5 EVO (all) da 50 a 100 mm Giordano Institute

    Fire behavior from outside

     BROOF (EN 13501-1)

    Fire behavior from outside for roofs

    CWFT (ENV 1187)

    LOADS TABLE

    PITCH BETWEEN SUPP.(m)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    50ACCIAIO0,6 + 0,5 164 105 73 54 41 32 26 22 18
    60ACCIAIO0,6 + 0,5 192 123 85 63 48 38 31 25 21
    80ACCIAIO0,6 + 0,5 363 232 161 119 91 72 58 48 40
    100ACCIAIO0,6 + 0,5 404 323 224 165 126 100 81 67 56
    120ACCIAIO0,6 + 0,5 438 351 265 195 149 118 96 79 66
    150ACCIAIO0,6 + 0,5 460 370 284 215 161 127 100 83 69
    200ACCIAIO0,6 + 0,5 465 375 290 220 169 149 112 94 82
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    50ACCIAIO0,6 + 0,5171976040282015129
    60ACCIAIO0,6 + 0,521612579533727201512
    80ACCIAIO0,6 + 0,52812131931359975594738
    100ACCIAIO0,6 + 0,5326252205173148113897159
    120ACCIAIO0,6 + 0,53592772251891641371088761
    150ACCIAIO0,6 + 0,53702882392031751491209364
    200ACCIAIO0,6 + 0,537829625021518615513310578

    Insights on the test report

    (Note) The report test given, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

    © 1999-2019, ISOLPACK SpA. All rights reserved.