PRODUCTS & SOLUTIONS

    SUPERCOPPO

    Specifically designed to create roofs of buildings of historical and architectural interest, it increases the value of the building by creating a prestigious aesthetic effect that faithfully reproduces the shape of the brick roofing.

    SUPERCOPPO is the first panel that imitates the shape of traditional brick roofing actually produced with a continuous cycle.

    SUPERCOPPO guarantees considerable savings without sacrificing the aesthetics of a brick roof, offering further benefits, including: reducing the weight of the roof, in this way the underlying structures are not overloaded, making it the ideal material for interventions rehabilitation and restructuring; the laying time is reduced compared to the traditional system with brick tiles, with lower installation costs and increased productivity; ordinary maintenance interventions are reduced to a minimum respect to the problems that may arise with a traditional covering in roof tiles during the winter season; elimination of problems due to birds and insects in the attic.

     

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Thicknesses (S)

    mm 40 - 60 - 80 - 100

    Tile height

    mm 40

    External support

    galvanized steel, galvanized prepainted or plastified steel; stainless steel.

    Flexible support

    cylindrical bituminous felt paper; embossed aluminum 0.08 mm thick; fiberglass.

    Insulation through continuous foaming process

    Polyurethane resins (PUR) and (not standard) polyisocianurate foams (PIR), density 39 ±2 Kg/m³ Declared value of thermal transmittance for a panel after 25 years of its installation, (Appendix C - EN 13165) Initial value of thermal conductivity: λ = 0.020 W/(mK)

    LOADS TABLE

    PITCH BETWEEN SUPP.(m)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,05 1,40 1,75 2,10 2,45 2,80 3,15 3,50
    40ACCIAIO0,5 + 0,4 417 283 170 125 95 75 65 48
    60ACCIAIO0,5 + 0,4 530 365 255 195 154 120 93 84
    80ACCIAIO0,5 + 0,4 590 442 333 278 192 155 97 78
    100ACCIAIO0,5 + 0,4 610 470 385 305 210 176 123 98
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,05 1,40 1,75 2,10 2,45 2,80 3,15 3,50
    40ACCIAIO0,5 + 0,4423291178133108847253
    60ACCIAIO0,5 + 0,454438626720516714410596
    80ACCIAIO0,5 + 0,4605463366294203174112100
    100ACCIAIO0,5 + 0,4622483397322226189136123

    (Note) The report test given above, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

    © 1999-2019, ISOLPACK SpA. All rights reserved.