PRODUCTS & SOLUTIONS

    DELTA 5

    pannello sandwich

    Dimensions

    width mm 1000

    length upon request from continuous production process.

    Thicknesses (S)

    mm 30 - 35 - 40 - 50 - 60 - 80 - 100 - 120 - 140 panels of non standard thicknesses can be supplied upon request previous agreement on minimum quantities.

    Supports

    galvanized steel, galvanized prepainted or plastified steel; stainless steel; natural or prepainted aluminium; copper (CORAM).

    Insulation through continuous foaming process

    Polyurethane resins (PUR) and (not standard) polyisocianurate foams (PIR), density 39 ±2 Kg/m³ Declared value of thermal transmittance for a panel after 25 years of its installation, (Appendix C - EN 13165) Initial value of thermal conductivity: λ = 0.020 W/(mK)

    Protective treatments for external support available

    On request for external polyester coating, atoxic prepainted for food contact, silicone polyester, PVDF, thermoplastic Class A application of PVC plastic films or other films

    Insights PIR foam

    On request is available in PIR foam version (polyisocyanurate), a particular polymeric structure that guarantees excellent characteristics of fire behavior. The entire range of ISOLPACK panels has been certified in Class B-s2, d0 at CSTB (France) and at KIT (Germany) in compliance with UNI EN 13823 (SBI) * where, "B" expresses the quantity of heat produced during the first 600 seconds of the test <7.5 MJ (best value obtainable for foamed products); "S2" represents a very low development of the fumes and "d0" indicates the absolute absence of drops and/or inflamed particles. In last years, the SBI test has become a standard requirement in Europe for fire behavior of building materials. The new European standard for sandwich panels - UNI EN 14509 - uses the SBI system for fire classification purposes. ISOLPACK is the only one in Italy to design light, highly insulating applications with unequaled fire reaction requirements. In many cases it can replace the rock wool panel considering its fire reaction characteristics combined with the very high thermal insulation power.

    CORAM version

    ISOLPACK ROOF mod. DELTA 5 is also available in CORAM version, with copper support (A).

    LOADS TABLE

    PITCH BETWEEN SUPP.(m)
    PANEL TICKNESS(mm)
    SHEET TICKNESS(mm)
    MATERIAL
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    30ALLUMINIO0,5 + 0,5
    30ACCIAIO0,5 + 0,5 691 310 170 104 69 47 33 24 18 13
    40ALLUMINIO0,5 + 0,5
    40ACCIAIO0,5 + 0,5 766 359 206 132 90 64 47 35 27 21
    50ALLUMINIO0,5 + 0,5
    50ACCIAIO0,5 + 0,5 838 404 241 159 112 82 61 47 37 29
    60ALLUMINIO0,5 + 0,5 80
    60ACCIAIO0,5 + 0,5 907 455 277 187 134 100 76 60 47 38
    80ALLUMINIO0,5 + 0,5
    80ACCIAIO0,5 + 0,5 1058 559 355 248 183 140 110 88 71 58
    100ACCIAIO0,5 + 0,5 1195 655 428 306 231 180 144 117 96 80
    120ACCIAIO0,5 + 0,5 1331 751 501 365 279 221 179 147 122 103
    140ACCIAIO0,5 + 0,5 1467 846 574 424 328 263 214 178 149 126
    MAXIMUM UNIFORMLY DISTRIBUTED LOAD (daN/m2) - DEFLECTION *
    Panel
    Thickness
    (mm)
    MaterialSheet
    thickness
    (mm)
    Pitch 'L' in meters between the supports
    1,50 2,00 2,50 3,00 3,50 4,00 4,50 5,00 5,50 6,00
    30ALLUMINIO0,5 + 0,5
    30ACCIAIO0,5 + 0,511598535553812782111661279775
    40ALLUMINIO0,5 + 0,5
    40ACCIAIO0,5 + 0,51211891703484352267210169139102
    50ALLUMINIO0,5 + 0,5
    50ACCIAIO0,5 + 0,51264930733587427324255205169141
    60ALLUMINIO0,5 + 0,5
    60ACCIAIO0,5 + 0,51284968763629502382399241198167
    80ALLUMINIO0,5 + 0,5
    80ACCIAIO0,5 + 0,513281020822677575496389313258215
    100ACCIAIO0,5 + 0,515951215992837710612480386318266
    120ACCIAIO0,5 + 0,515961220995840713615544460378316
    140ACCIAIO0,5 + 0,515971222999842715620548490439367

    (Note) The report test given above, is provided for information purposes only. Values and formulas should not be used to determine or calculate the flow rate of the panel. It is the responsibility and care of the customer and/or designer to draft appropriate calculations with specific reference for individual uses. The thicknesses and quality of steel defined in the report test above, does not represent a standard of product as the combination of thicknesses and materials is determined by the customer according to their technical requirements, therefore the customer and/or the designer are required to specify thickness, quality and type of materials that the producer will use in the construction of the panels.

     

    * deflection ≤ 1/100 L

    © 1999-2019, ISOLPACK SpA. All rights reserved.